|
|
| |
|
Counter Ejectors |
Counter
Ejector PDF
Catalog |
|
|
|
At FnD, we offer
a range of Counter Ejectors to meet your
needs, and unlike some companies, we can
also handle the installation.
Installation can usually be accomplished in
one working day. Since 1982, we've
installed hundreds of Counter Ejectors
worldwide. |
 |
|
We can also
claim to be one of them of the most
experienced, if not THE most experienced
company to offer retrofit counter-ejectors. We have
installed behind everything from from Koppers, to
Curioni Mini-Downfolds. We can install behind any machine
successfully, without limiting the machines
capabilities.
Our lead time is
down to 12 weeks! |
 |
| |
Click on photo
for larger view |
|
Available Sizes:
- CE20 (Mini) 23 X 60
- CE35 (35") 35 X 80 Range
- CE50 (50") 50 X 110 Range
We have also manufactured machines for
66" and Larger. Our largest
installation is 110 x 200.
Components:
- Main Drive is a
Magnetek Vector Drive. 10HP on both 35 and
50" machines, 5Hp on mini's and bigger if
necessary on larger CE's.
- We use a
Dynapar Ambassador series counter with a
photo eye mounted at the entrance to the
hopper to assure accurate bundle count.
- All drive
components are Gates Polychain for superior
wear resistance.
- Kicker
mounted using IKO 25mm Linear bearings.
- Minimal spare
parts requirements.
- Very reliable
machines, lack of down time and maintenance
issues a plus for our machinery. All models
or sizes very simple to work on.
-
Owner
and operator manual includes
original manufacturers part numbers.
We try to use parts that are readily
available in most any area.
Available Options:
- Die Cut Option for running die cuts
or outside glue on down fold machines.
- Up to a 60" boardline.
- Side Guides for running smaller than
usual (width across machine) than normal
boxes. Standard on Minis.
- Optional bundle separator for
improved bundle count accuracy.
Die Cut Option:
|
Servo
controlled, aluminum "lift" rollers
triggered by the trailing edge of
each box clearing a photo-eye. |
|
|
|
The lift
rollers rotate one revolution to
pick-up and hold trailing edge of
box to allow clearance for next box.
|
 |
|
Click on photo
for larger view
|
|
Adding
the Die Cut Option does not reduce
the maximum speed of the Counter
Ejector! |
|
|
Entrance
Belts: |
|
|
 |
|
Click on photo
for larger view
|
|
Entrance
belts of counter-ejector. On all top
fold folders we install
independently controlled variable
speed top belts. These aid in the
squaring of the panels of the box.
Each belt driven by a 3HP motor and
follows speed of machine with a
potentiometer to allow over speed of
up to 15%. |
| |
|
Hopper |
|
|
|
 |
|
Click on photo
for larger view
|
|
Hopper of
Counter-Ejector.
Squaring
Section
(yellow bar)
moves
straight in
and out as
opposed to
paddling
like many.
This allows
the bar to
"straighten,
if possible,
the out of
square panel
instead of
just bending
it down. The
hold downs,
compression
section and
pusher are
all
adjustable
laterally. |
|
|
|
Exit of
Counter
Ejector |
|
|
|
 |
|
Click on photo
for larger view
|
|
Compression
section
adjustable
with linear
actuator.
Entire upper
section to
include the
compression
section,
kicker, and
hold downs
adjustable
laterally.
View of exit
belts. When
bundle is
ejected, it
is ejected
either 6, 8,
10, or 12
inches
depending on
machine
size. The
bundle is
ejected onto
the belts
and the
belts drive
the bundle
onto the
skate
conveyor.
Bundle
remains
under
compression
until it
reaches the
end of the
machine.
Exit height
typically
boardline of
folder plus
6". |
|
|
|
|
|
| |
|
|
|
